{"title":"_XFIT__FANTIC XX 125 2023","description":"","products":[{"product_id":"switch-fxkb4020055st","title":"Race Kill Button","description":"\u003cp\u003eRFX Race Series kill buttons are an exact OEM replacement part.\u003c\/p\u003e\n\u003cp\u003eComplete with the same couplings, fasteners, connectors and exact cable lengths as the genuine part.\u003c\/p\u003e\n\u003cp\u003eAvailable for a wide variety of bikes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOEM replacement\u003c\/li\u003e\n\u003cli\u003eAccepts all original connectors\u003c\/li\u003e\n\u003cli\u003eOEM cable length\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitting Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStart by removing the front number plate.\u003c\/li\u003e\n\u003cli\u003eCarefully snip any cable ties holding the start and stop switch cables to the bars then un-screw the clamps and let these hang down.\u003c\/li\u003e\n\u003cli\u003eLocate the connector for the switch on the bike, these are often close by to the headstock on the chassis but sometimes can be under the tank.\u003c\/li\u003e\n\u003cli\u003eUnclip the connector and remove the switch taking a note of the routing for the wiring.\u003c\/li\u003e\n\u003cli\u003eClean the connector using an electrical contact cleaner.\u003c\/li\u003e\n\u003cli\u003eLoosely attach the new switch on to the handlebars in the desired position.\u003c\/li\u003e\n\u003cli\u003eRoute the wires as per the old switch and clip the connector together.\u003c\/li\u003e\n\u003cli\u003eCheck all free pay in the wires by turning the bars to full extension and making sure the wires don’t pull tight, adjust if necessary.\u003c\/li\u003e\n\u003cli\u003eRe-fit cable ties to the wires if possible positioning the cables to the back of the bars to prevent damage from roost.\u003c\/li\u003e\n\u003cli\u003eRe-fit your number plate\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RFX","offers":[{"title":"Default Title","offer_id":52625856004360,"sku":"FXKB4020055ST","price":20.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/0718\/7976\/files\/800Wx800H-1128600-1.jpg?v=1760520562"},{"product_id":"brake-pedal-fxrb4040099bu","title":"Pro Flexi-Tip Rear Brake Pedal","description":"\u003cp\u003eRFX Pro Series Brake Pedals are designed and tested at the highest level.\u003c\/p\u003e\n\u003cp\u003ePro Series Brake Pedals are manufactured from 7075-T6 aluminium and feature an OEM type forged shaft, a smooth finish on the shaft helps to reduce the wear associated with a ridged design.\u003c\/p\u003e\n\u003cp\u003ePro Series Flexible tips are CNC machined billet aluminium and feature a spring loaded rotatable tip which under impact such as in a rut will spin to reduce damage. The tip also features steel teeth to help grip in muddy conditions.\u003c\/p\u003e\n\u003cp\u003ePro Series Flexible tips also incorporate a stop on the pivot tip, this stops the tip at 90 degrees of rotation preventing damage that can occur if the tip rotates under the clutch cover.\u003c\/p\u003e\n\u003cp\u003ePro Series Brake Pedals also incorporate a cable brake snake, this helps prevent the pedal shaft being bent around in a collision.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCNC Flexible Tip \u003c\/strong\u003eto reduce impact damage\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCold Forged Arm \u003c\/strong\u003efor improved core strength\u003c\/p\u003e\n\u003cstrong\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eMade from 7075 aerospace aluminium construction.\u003c\/li\u003e\n\u003cli\u003eT6 heat treated to increase tensile strength.\u003c\/li\u003e\n\u003cli\u003eForged shaft for increased core strength.\u003c\/li\u003e\n\u003cli\u003eSmooth shaft design to reduce surface wear.\u003c\/li\u003e\n\u003cli\u003eCNC machined billet flexible tip.\u003c\/li\u003e\n\u003cli\u003eRotating action reduces impact damage.\u003c\/li\u003e\n\u003cli\u003eSteel insert teeth for increased grip.\u003c\/li\u003e\n\u003cli\u003eMechanical stop on the tip.\u003c\/li\u003e\n\u003cli\u003eIncorporated brake snake.\u003c\/li\u003e\n\u003cli\u003eColour anodised to prevent corrosion.\u003c\/li\u003e\n\u003cli\u003eLaser etched logo.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003e\u003cstrong\u003eFitting Instructions:\u003c\/strong\u003e\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eStart by taking note mark where the height if the pedal tip is in relation to the footpeg.\u003c\/li\u003e\n\u003cli\u003eRemove the R-clip or split pin from the rear of the brake bolt located behind the frame.\u003c\/li\u003e\n\u003cli\u003eRemove the pivot bolt holding the pedal to the frame.\u003c\/li\u003e\n\u003cli\u003eDetach the return spring from the pedal and leave hanging.\u003c\/li\u003e\n\u003cli\u003eSpin the pedal outwards exposing the split pin at the rear of the pedal clevis.\u003c\/li\u003e\n\u003cli\u003eRemove this split pin and the locating dowel, the rear brake pedal will now remove.\u003c\/li\u003e\n\u003cli\u003eRemove the oil seals from the old pedal clean and re-fit to the new pedal.\u003c\/li\u003e\n\u003cli\u003eClean all the parts with a multi-purpose lube such as maxima MPPL, ready for re-installing.\u003c\/li\u003e\n\u003cli\u003eRe- fit the Brake clevis, Locating pin and split pin.\u003c\/li\u003e\n\u003cli\u003eRe-Fit the return spring.\u003c\/li\u003e\n\u003cli\u003eApply some Maxima waterproof grease to the pivot bolt align the pivot hole and re-fit the bolt.\u003c\/li\u003e\n\u003cli\u003eTorque the pivot bolt to the required torque as per the owner’s manual.\u003c\/li\u003e\n\u003cli\u003eRe-fit the R-clip\/Split pin to the rear of the pivot bolt.\u003c\/li\u003e\n\u003cli\u003eWith the pedal now attached adjust the pedal height to the correct position and free play, do this by loosening the nut above the clevis and turning the plunger bolt inwards or outwards to suit.\u003c\/li\u003e\n\u003cli\u003eNow fit the brake snake.\u003c\/li\u003e\n\u003cli\u003eJapanese models- Remove the lower engine mount nut and washer, replace the old washer with the new washer which is attached to the brake snake.\u003c\/li\u003e\n\u003cli\u003eKTM models- Remove the new washer which is attached to the brake snake, put this aside as it’s not required on the KTM, loop the cable around the lower engine mount and replace inside the crimp fitting.\u003c\/li\u003e\n\u003cli\u003eSet the correct tension on the brake snake, remembering to allow for the pedal to extend down.\u003c\/li\u003e\n\u003cli\u003eCrimp the fitting together using pliers and trim excess cable.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RFX","offers":[{"title":"Default Title","offer_id":52626903925000,"sku":"FXRB4040099BU","price":82.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/0718\/7976\/files\/800Wx800H-1128645-1.jpg?v=1760535616"},{"product_id":"oil-filter-fxof4030055st","title":"Race Oil Filter","description":"\u003cp\u003eRFX Oil Filters are produced to the same high specification as OEM ensuring the ultimate protection for your engine.\u003c\/p\u003e","brand":"RFX","offers":[{"title":"Default Title","offer_id":52627107512584,"sku":"FXOF4030055ST","price":6.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/0718\/7976\/files\/800Wx800H-1128625-1.jpg?v=1760538406"},{"product_id":"brake-pedal-fxrb4040199","title":"Pro Solid-Tip Rear Brake Pedal","description":"\u003cp\u003eRFX Pro Series Brake Pedals are designed and tested at the highest level.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003ePro Series Brake Pedals are manufactured from 7075-T6 aluminium and feature an OEM type forged shaft, a smooth finish on the shaft helps to reduce the wear associated with a ridged design.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003ePro Series Flexible tips are CNC machined billet aluminium and feature a spring loaded rotatable tip which under impact such as in a rut will spin to reduce damage. The tip also features steel teeth to help grip in muddy conditions.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003ePro Series Flexible tips also incorporate a stop on the pivot tip, this stops the tip at 90 degrees of rotation preventing damage that can occur if the tip rotates under the clutch cover.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003ePro Series Brake Pedals also incorporate a cable brake snake, this helps prevent the pedal shaft being bent around in a collision.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cul type=\"disc\"\u003e \u003cli\u003eNew 7075-T6 Billet solid tip, with flow design.\u003c\/li\u003e \u003cli\u003eNew 2 position adjustability on tip.\u003c\/li\u003e \u003cli\u003eNew optional Hard Anodized tip version available for current models. \u003c\/li\u003e \u003cli\u003eNew style brake snake with adjustable clamp.\u003c\/li\u003e \u003cli\u003eNew Hard anodized black shaft to prevent corrosion and reduce wear.\u003c\/li\u003e \u003cli\u003eReplaceable Stainless Steel teeth for increased grip.\u003c\/li\u003e \u003cli\u003eSupplied complete with bearings and bushes for selected models.\u003c\/li\u003e \u003cli\u003eLaser etched logo.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFitting Instructions:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cul type=\"disc\"\u003e \u003cli\u003eStart by taking note mark where the height if the pedal tip is in relation to the footpeg.\u003c\/li\u003e \u003cli\u003eRemove the R-clip or split pin from the rear of the brake bolt located behind the frame.\u003c\/li\u003e \u003cli\u003eRemove the pivot bolt holding the pedal to the frame.\u003c\/li\u003e \u003cli\u003eDetach the return spring from the pedal and leave hanging. \u003c\/li\u003e \u003cli\u003eSpin the pedal outwards exposing the split pin at the rear of the pedal clevis.\u003c\/li\u003e \u003cli\u003eRemove this split pin and the locating dowel, the rear brake pedal will now remove.\u003c\/li\u003e \u003cli\u003eRemove the oil seals from the old pedal clean and re-fit to the new pedal.\u003c\/li\u003e \u003cli\u003eClean all the parts with a multi-purpose lube such as maxima MPPL, ready for re-installing.\u003c\/li\u003e \u003cli\u003eRe- fit the Brake clevis, Locating pin and split pin.\u003c\/li\u003e \u003cli\u003eRe-Fit the return spring.\u003c\/li\u003e \u003cli\u003eApply some Maxima waterproof grease to the pivot bolt align the pivot hole and re-fit the bolt.\u003c\/li\u003e \u003cli\u003eTorque the pivot bolt to the required torque as per the owner’s manual.\u003c\/li\u003e \u003cli\u003eRe-fit the R-clip\/Split pin to the rear of the pivot bolt.\u003c\/li\u003e \u003cli\u003eWith the pedal now attached adjust the pedal height to the correct position and free play, do this by loosening the nut above the clevis and turning the plunger bolt inwards or outwards to suit.\u003c\/li\u003e \u003cli\u003eNow fit the brake snake.\u003c\/li\u003e \u003cli\u003eJapanese models- Remove the lower engine mount nut and washer, replace the old washer with the new washer which is attached to the brake snake.\u003c\/li\u003e \u003cli\u003eKTM models- Remove the new washer which is attached to the brake snake, put this aside as it’s not required on the KTM, loop the cable around the lower engine mount and replace inside the crimp fitting.\u003c\/li\u003e \u003cli\u003e Set the correct tension on the brake snake, remembering to allow for the pedal to extend down. \u003c\/li\u003e \u003cli\u003eCrimp the fitting together using pliers and trim excess cable.\u003c\/li\u003e \u003c\/ul\u003e","brand":"RFX","offers":[{"title":"Black \u0026 Blue","offer_id":52639652020488,"sku":"FXRB4040199BU","price":82.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/0718\/7976\/files\/800Wx800H-1110846001-1_f2795659-dd3d-4697-a131-2ea691edb6bc.jpg?v=1760693593"},{"product_id":"kickstart-lever-fxks4010099","title":"Pro Kickstart Lever","description":"\u003cp\u003eRFX Pro Series Kickstart Lever (Hard Anodised - Black) Yamaha YZ125 05-16\u003c\/p\u003e","brand":"RFX","offers":[{"title":"Black","offer_id":52789678801160,"sku":"FXKS4010099H3","price":113.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/0718\/7976\/files\/800Wx800H-1110749001-1.jpg?v=1762960613"},{"product_id":"lever-set-fxfl4010055","title":"Race Flexible Lever Set","description":"\u003cp\u003eRFX Race Forged Flexible Lever Set\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFitment \u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eYamaha YZ125\/250 15-16 YZF250\/450 09-16\u003c\/p\u003e \u003cp\u003eRFX Hardware Race Series Forged parts are designed, tested and manufactured for the serious competitor.  \u003c\/p\u003e \u003cp\u003eUsing our 30 years of racing and engineering experience we have blended quality designs, superior materials and precision manufacturing processes to create factory racing parts available to\u003cbr\u003eeveryone.\u003c\/p\u003e \u003cp\u003eRace lever Sets Feature a Forged aluminium Construction and are colour anodised for that Pro-look.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eFully flexible design allowing levers to rotate outwards in accidents\u003c\/li\u003e \u003cli\u003eReach adjusters to allow levers to be perfectly adjusted to rider preference\u003c\/li\u003e \u003cli\u003eStainless steel springs to resist corrosion\u003c\/li\u003e \u003cli\u003eForged Construction for increased strength\u003c\/li\u003e \u003cli\u003ePhospher bronze lever pivot inserts for smooth lever action\u003c\/li\u003e \u003cli\u003eSpring and bush rebuild kits available to ensure proper lever action at all times\u003c\/li\u003e \u003c\/ul\u003e","brand":"RFX","offers":[{"title":"Blue","offer_id":52789704327432,"sku":"FXFL4010055BU","price":94.99,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":52789704360200,"sku":"FXFL4010055RD","price":94.99,"currency_code":"EUR","in_stock":true},{"title":"Black","offer_id":52983491363080,"sku":"FXFL4010055BK","price":94.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/0718\/7976\/files\/800Wx800H-1110548001-1.jpg?v=1762960872"},{"product_id":"rear-axle-adjuster-blocks-fxab4020099","title":"Pro Rear Axle Blocks","description":"\u003cp\u003eRFX Pro Series Axle Blocks are designed to speed up \u0026amp; improve wheel changes with easy fitting and more precise alignment.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003eCNC manufactured from 7075 aerospace grade aluminium.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003ePro Series Axle Blocks Features:-\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cul type=\"disc\"\u003e \u003cli\u003eLaser etched RFX logo.\u003c\/li\u003e \u003cli\u003eCNC 7075 Aerospace aluminium.\u003c\/li\u003e \u003cli\u003eCAD designed profile for lightness.\u003c\/li\u003e \u003cli\u003eTighter tolerances for improved fit.\u003c\/li\u003e \u003cli\u003eAlignment scales both sides for precision.\u003c\/li\u003e \u003cli\u003eColour anodised for that factory bike look.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eFitting Instructions\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cul type=\"disc\"\u003e \u003cli\u003eStart with bike on a stand with the rear wheel raised from the ground.\u003c\/li\u003e \u003cli\u003eUndo rear axle nut and remove spindle.\u003c\/li\u003e \u003cli\u003eLift chain of sprockets \u0026amp; remove rear wheel.\u003c\/li\u003e \u003cli\u003eRemove old axle blocks.\u003c\/li\u003e \u003cli\u003eRemove old axle block bolts.\u003c\/li\u003e \u003cli\u003eRemove the spindle from the axle block (KTM Only) to do this may require some heat and a vice, be careful not to damage the spindle.\u003c\/li\u003e \u003cli\u003eRe-fit the spindle to the new axle block (KTM Only) make sur to use red threadlock when doing this. \u003c\/li\u003e \u003cli\u003eClean around the swing arm making sure clean and free of debris.\u003c\/li\u003e \u003cli\u003eTake the new RFX Axle Blocks and place on swing arm ensuring alignment and bolts are in position.\u003c\/li\u003e \u003cli\u003eClean spindle and axle nut.\u003c\/li\u003e \u003cli\u003eApply waterproof grease to spindle and wheel spacers.\u003c\/li\u003e \u003cli\u003eLift the wheel into position and re-apply the chain.\u003c\/li\u003e \u003cli\u003eInsert Spindle all the way through and re-attach the axle nut, do not fully tighten nut. \u003c\/li\u003e \u003cli\u003eAlign the wheel square using the axle blocks and adjust to Set the chain to the correct tension (Check owner’s manual for correct tension)\u003c\/li\u003e \u003cli\u003eTighten axle nut to correct torque as per owner’s manual.\u003c\/li\u003e \u003c\/ul\u003e","brand":"RFX","offers":[{"title":"Blue","offer_id":52789752594696,"sku":"FXAB4020099BU","price":39.99,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":52789752627464,"sku":"FXAB4020099RD","price":39.99,"currency_code":"EUR","in_stock":true},{"title":"Black","offer_id":52983488479496,"sku":"FXAB4020099BK","price":39.99,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":52983685251336,"sku":"FXAB4020099SV","price":39.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/0718\/7976\/files\/800Wx800H-1111019001-1.jpg?v=1762961748"},{"product_id":"reservoir-cap-fxrc4110099","title":"Pro Reservoir Cap Kit","description":"\u003cp\u003eRFX Pro Series Reservoir Covers are CNC machined from aerospace aluminium and are a perfect factory style replacement to your standard reservoir covers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• CNC machined from aerospace grade aluminium\u003cbr\u003e• Tighter tolerances than OEM cast part\u003cbr\u003e• Highly polished then colour anodised for that factory look\u003cbr\u003e• Laser etched RFX logo\u003cbr\u003e• Available in a variety of colours for a wide range of models\u003cbr\u003e• Also available KTM clutch reservoir covers to accept standard hot start levers\u003c\/p\u003e","brand":"RFX","offers":[{"title":"Blue","offer_id":52789753544968,"sku":"FXRC4110099BU","price":34.99,"currency_code":"EUR","in_stock":true},{"title":"Grey","offer_id":52789753577736,"sku":"FXRC4110099H2","price":34.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/0718\/7976\/files\/800Wx800H-1110889001-1.jpg?v=1762961764"},{"product_id":"wheel-spacers-fxws4020099","title":"Pro Front Wheel Spacers","description":"\u003cp\u003eRFX Pro Series wheel spacers are lighter and more durable than OEM.\u003c\/p\u003e\n\u003cp\u003eConstructed from 7075-T6 aluminium and colour anodised to increase durability. This helps to reduce surface wear and lessens the amount of dirt entering the hub which in turn extends the life of the bearing.\u003c\/p\u003e\n\u003cp\u003eDesigned with a rear lip to help keep them hooked into the seals, this reduces the chance of falling out during maintenance, speeding up wheel changes.\u003c\/p\u003e\n\u003cp\u003eRFX products are tested and used by many top Grand Prix and British Motocross teams.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e7075-T6 Aluminium Construction.\u003c\/li\u003e\n\u003cli\u003eColour anodised for durability.\u003c\/li\u003e\n\u003cli\u003eMachined rear location lip.\u003c\/li\u003e\n\u003cli\u003eCNC Machined For a tighter tolerance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitting Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStart with the motorcycle on a box stand with the wheels raised from the ground.\u003c\/li\u003e\n\u003cli\u003eRemove the large spindle nut and loosen any pinch bolts on the lower fork leg.\u003c\/li\u003e\n\u003cli\u003eRemove the spindle from the wheel this may require the use of a brass punch and hammer if tight.\u003c\/li\u003e\n\u003cli\u003eFront wheel will now remove.\u003c\/li\u003e\n\u003cli\u003eThe rear wheel should now be loose enough to push forward and lift the chain from the rear sprocket.\u003c\/li\u003e\n\u003cli\u003eRear wheel will now remove.\u003c\/li\u003e\n\u003cli\u003eRemove the wheel spacers from the wheels.\u003c\/li\u003e\n\u003cli\u003eClean in and around the seals with contact cleaner such as Maxima Electrical Contact and re-grease under the seal.\u003c\/li\u003e\n\u003cli\u003eFit the new wheel spacers.\u003c\/li\u003e\n\u003cli\u003eMake sure to open the brake pads apart inside the brake callipers to give you extra room when re-fitting the wheel.\u003c\/li\u003e\n\u003cli\u003eRe-fit the wheels and push the spindles through.\u003c\/li\u003e\n\u003cli\u003eRe-fit the chain and Set the proper chain tension by adjusting the axle blocks.\u003c\/li\u003e\n\u003cli\u003eTighten\u003cbr\u003ethe large spindle nuts to the correct torque Setting.\u003c\/li\u003e\n\u003cli\u003eWith the bike of the stand pump the front forks up and down to align the front forks then tighten the pinch bolts.\u003c\/li\u003e\n\u003cli\u003eFinally pump the brakes to re- align the callipers.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RFX","offers":[{"title":"Blue","offer_id":52789920629000,"sku":"FXWS4020099BU","price":24.99,"currency_code":"EUR","in_stock":true},{"title":"Black","offer_id":52983499522312,"sku":"FXWS4020099BK","price":24.99,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":52983665328392,"sku":"FXWS4020099SV","price":24.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/0718\/7976\/files\/800Wx800H-1110987001-1.jpg?v=1762962815"},{"product_id":"wheel-spacers-fxws4050099","title":"Pro Rear Wheel Spacers","description":"\u003cp\u003eRFX Pro Series wheel spacers are lighter and more durable than OEM.\u003c\/p\u003e\n\u003cp\u003eConstructed from 7075-T6 aluminium and colour anodised to increase durability. This helps to reduce surface wear and lessens the amount of dirt entering the hub which in turn extends the life of the bearing.\u003c\/p\u003e\n\u003cp\u003eDesigned with a rear lip to help keep them hooked into the seals, this reduces the chance of falling out during maintenance, speeding up wheel changes.\u003c\/p\u003e\n\u003cp\u003eRFX products are tested and used by many top Grand Prix and British Motocross teams.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e7075-T6 Aluminium Construction.\u003c\/li\u003e\n\u003cli\u003eColour anodised for durability.\u003c\/li\u003e\n\u003cli\u003eMachined rear location lip.\u003c\/li\u003e\n\u003cli\u003eCNC Machined For a tighter tolerance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitting Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStart with the motorcycle on a box stand with the wheels raised from the ground.\u003c\/li\u003e\n\u003cli\u003eRemove the large spindle nut and loosen any pinch bolts on the lower fork leg.\u003c\/li\u003e\n\u003cli\u003eRemove the spindle from the wheel this may require the use of a brass punch and hammer if tight.\u003c\/li\u003e\n\u003cli\u003eFront wheel will now remove.\u003c\/li\u003e\n\u003cli\u003eThe rear wheel should now be loose enough to push forward and lift the chain from the rear sprocket.\u003c\/li\u003e\n\u003cli\u003eRear wheel will now remove.\u003c\/li\u003e\n\u003cli\u003eRemove the wheel spacers from the wheels.\u003c\/li\u003e\n\u003cli\u003eClean in and around the seals with contact cleaner such as Maxima Electrical Contact and re-grease under the seal.\u003c\/li\u003e\n\u003cli\u003eFit the new wheel spacers.\u003c\/li\u003e\n\u003cli\u003eMake sure to open the brake pads apart inside the brake callipers to give you extra room when re-fitting the wheel.\u003c\/li\u003e\n\u003cli\u003eRe-fit the wheels and push the spindles through.\u003c\/li\u003e\n\u003cli\u003eRe-fit the chain and Set the proper chain tension by adjusting the axle blocks.\u003c\/li\u003e\n\u003cli\u003eTighten\u003cbr\u003ethe large spindle nuts to the correct torque Setting.\u003c\/li\u003e\n\u003cli\u003eWith the bike of the stand pump the front forks up and down to align the front forks then tighten the pinch bolts.\u003c\/li\u003e\n\u003cli\u003eFinally pump the brakes to re- align the callipers.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RFX","offers":[{"title":"Blue","offer_id":52789920891144,"sku":"FXWS4050099BU","price":24.99,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":52983500701960,"sku":"FXWS4050099SV","price":24.99,"currency_code":"EUR","in_stock":true},{"title":"Black","offer_id":53009071931656,"sku":"FXWS4050099BK","price":24.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/0718\/7976\/files\/800Wx800H-1110989001-1.jpg?v=1762962818"},{"product_id":"brake-disc-fxbd4070555bk","title":"Race Wave Fixed Brake Disc","description":"\u003cp\u003eRFX Race Series Discs are designed and tested at the highest level by top World and British championship race teams. \u003cbr\u003ePrecision laser cut from high grade stainless steel and heat treated for wear resistance, RFX Discs also feature a special Comaxit heatproof coloured finish on non-wear faces for the best corrosion resistance.\u003cbr\u003eRFX Race Series Discs are surface ground to within 0.01mm for instant brake feel and reduced fade.\u003cbr\u003eRFX Race Series Discs are the new price leader in OEM replacement brake discs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRace Series Disc Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLaser cut from high grade quality stainless steel.\u003c\/li\u003e\n\u003cli\u003eHeat treated to withstand excessive brake pad wear.\u003c\/li\u003e\n\u003cli\u003eComaxit coating (metal colour surface treatment).\u003c\/li\u003e\n\u003cli\u003eCAD designed profile for lightness and reduced unsprung weight.\u003c\/li\u003e\n\u003cli\u003eWave design ensures maximum pad cleaning.\u003c\/li\u003e\n\u003cli\u003ePrecision cut vented holes and wave design dissipate heat.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RFX","offers":[{"title":"115\/240 \/ 6.5","offer_id":52817760616712,"sku":"FXBD4070555BK","price":82.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/0718\/7976\/files\/800Wx800H-1128491-1.jpg?v=1763481552"},{"product_id":"brake-disc-fxbd4060099bk","title":"Pro Wave Floating Brake Disc","description":"\u003cp\u003eRFX Race Series Discs are designed and tested at the highest level by top World and British championship race teams. \u003c\/p\u003e \u003cp\u003ePrecision laser cut from high grade stainless steel and heat treated for wear resistance, RFX Discs also feature a special comaxit heat proof coloured finish on non-wear faces for the best corrosion resistance.\u003c\/p\u003e \u003cp\u003eRFX Race Series Discs are surface ground to within 0.01mm for instant brake feel and reduced fade.\u003c\/p\u003e \u003cp\u003eRFX Race Series Discs are the new price leader in OEM replacement brake discs.\u003c\/p\u003e \u003cstrong\u003e\u003cstrong\u003eRace Series Disc Features:\u003c\/strong\u003e\u003c\/strong\u003e \u003cul\u003e \u003cli\u003eLaser cut from high grade quality stainless steel.\u003c\/li\u003e \u003cli\u003eHeat treated to withstand excessive brake pad wear.\u003c\/li\u003e \u003cli\u003eComaxit coating (metal colour surface treatment).\u003c\/li\u003e \u003cli\u003eCAD designed profile for lightness and reduced unsprung weight.\u003c\/li\u003e \u003cli\u003eWave design ensures maximum pad cleaning.\u003c\/li\u003e \u003cli\u003ePrecision cut vented holes and wave design dissipate heat.\u003c\/li\u003e \u003c\/ul\u003e","brand":"RFX","offers":[{"title":"118.2\/270 \/ 6.5","offer_id":52817777361160,"sku":"FXBD4060099BK","price":82.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/0718\/7976\/files\/800Wx800H-1128489-1.jpg?v=1763481877"},{"product_id":"linkage-bearings-fxbe410115","title":"Race Linkage Bearing Kit","description":null,"brand":"RFX","offers":[{"title":"Default Title","offer_id":52991839109384,"sku":"FXBE4101155ST","price":9999.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/0718\/7976\/files\/111083_20-_20Race_20Linkage_20Kit_20YZ125_2006-24_20YZ250_2006-24_20-_201_20-_20Front.png?v=1766586468"},{"product_id":"steering-bearings-fxbe430015","title":"Race Steering Bearing Kit","description":null,"brand":"RFX","offers":[{"title":"Default Title","offer_id":52991841272072,"sku":"FXBE4300155ST","price":9999.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/0718\/7976\/files\/110957_20-_20Race_20Steering_20Bearing_20Kit_20CR125250_2092-_20CR500R_2001-_20-_201_20-_20Front_70b9cd5b-076c-418d-a418-302d1be084fe.png?v=1766586451"},{"product_id":"steering-bearings-fxbe330105","title":"Race Steering Bearing Kit","description":null,"brand":"RFX","offers":[{"title":"Default Title","offer_id":52991842812168,"sku":"FXBE3301055ST","price":9999.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/0718\/7976\/files\/110957_20-_20Race_20Steering_20Bearing_20Kit_20CR125250_2092-_20CR500R_2001-_20-_201_20-_20Front_99420044-3698-4408-a643-b32b1799a246.png?v=1766586455"},{"product_id":"swingarm-bearings-fxbe420075","title":"Race Swingarm Bearing Kit","description":null,"brand":"RFX","offers":[{"title":"Default Title","offer_id":52991843500296,"sku":"FXBE4200755ST","price":9999.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/0718\/7976\/files\/111098_20-_20Race_20Swingarm_20Kit_20YZ125_2006-23_20-_201_20-_20Front.png?v=1766586469"},{"product_id":"brake-pads-fxbp102009","title":"Pro Sintered Brake Pads","description":null,"brand":"RFX","offers":[{"title":"Default Title","offer_id":52991847530760,"sku":"FXBP1020099CP","price":9999.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/0718\/7976\/files\/111284_20-_20Pro_20Rear_20Brake_20Pads_20CR8085_20CRF150_20KXRM_20125250_20-_201_20-_20Front.png?v=1766586479"},{"product_id":"brake-pads-fxbp204009","title":"Pro Sintered Brake Pads","description":null,"brand":"RFX","offers":[{"title":"Default Title","offer_id":52991847661832,"sku":"FXBP2040099CP","price":9999.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/0718\/7976\/files\/111292_20-_20Pro_20Rear_20Brake_20Pads_20KXF250450_20RMZ_20YZYZF125-450_20-_201_20-_20Front.png?v=1766586480"},{"product_id":"brake-pads-fxbp404009","title":"Pro Sintered Brake Pads","description":null,"brand":"RFX","offers":[{"title":"Default Title","offer_id":52991847891208,"sku":"FXBP4040099CP","price":9999.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/0718\/7976\/files\/111298_20-_20Pro_20Front_20Brake_20Pads_20YZ125250_20YZF250_2020-_20YZF450_20-_201_20-_20Front.png?v=1766586480"},{"product_id":"brake-pads-fxbp405009","title":"Pro Sintered Brake Pads","description":null,"brand":"RFX","offers":[{"title":"Default Title","offer_id":52991848120584,"sku":"FXBP4050099CP","price":9999.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/0718\/7976\/files\/111299_20-_20Pro_20Front_20Brake_20Pads_20YZF250_2021-24_20YZF450_2020-24_20-_201_20-_20Front.png?v=1766586481"},{"product_id":"air-filter-fxaf40002","title":"Race Air Filter","description":"","brand":"RFX","offers":[{"title":"Non-Oiled \/ Back-Fire Resistant \u0026 Dual-Stage","offer_id":52992244351240,"sku":"FXAF4000255NO","price":15.99,"currency_code":"EUR","in_stock":true},{"title":"Pre-Oiled \/ Back-Fire Resistant \u0026 Dual-Stage","offer_id":52992244384008,"sku":"FXAF4000255PO","price":18.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0947\/0718\/7976\/files\/800Wx800H-1128390-1.png?v=1765968952"}],"url":"https:\/\/www.rfxracing.com\/collections\/fantic-xx-125-2023.oembed","provider":"RFX racing","version":"1.0","type":"link"}