{"product_id":"throttle-tube-fxtt5010199","title":"Pro Throttle Tube","description":"\u003cp\u003eRFX Pro Series Throttle Tubes are machined from billet aluminium and feature a sealed bearing and Teflon sleeve to provide an effortless throttle action. RFX Pro Series Tubes resist damage in a crash unlike standard plastic tubes. For these reasons they are used by many of the top race teams and riders in the U.K Championships such as STR KTM.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReplacement throttle tubes for all popular off road bikes.\u003c\/li\u003e\n\u003cli\u003eUses the same cam profile as the OEM part for proper throttle control.\u003c\/li\u003e\n\u003cli\u003eHard anodised billet aluminium construction.\u003c\/li\u003e\n\u003cli\u003eSealed ball bearing and Teflon sleeve virtually eliminate friction.\u003c\/li\u003e\n\u003cli\u003eLaser etched with RFX logo.\u003c\/li\u003e\n\u003cli\u003eKnurled grip mounted area.\u003c\/li\u003e\n\u003cli\u003eReduced chance of damage if you crash.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRoller Bearing \u003c\/strong\u003efor an effortless throttle action\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCNC Machined Construction \u003c\/strong\u003efor the ultimate crash resistance\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitting Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSlide the rubber boot down and disassemble the throttle housing, remove the old throttle tube taking care not to damage the throttle cables.\u003c\/li\u003e\n\u003cli\u003eCarefully remove grip from the old throttle tube if required.\u003c\/li\u003e\n\u003cli\u003eInspect the cables and housing for excess damage or wear, clean and lube them or replace if required.\u003c\/li\u003e\n\u003cli\u003eClean the handlebar and inspect for damage where the old throttle tube has been spinning on the bar if a ridge is present replace the handlebars.\u003c\/li\u003e\n\u003cli\u003eSlide the new throttle tube on the handlebar and lube using a penetrating lubricant preferably Maxima MPPL (do not use grease as this attracts dirt and makes the throttle stick after a short period of time).\u003c\/li\u003e\n\u003cli\u003eRe-assemble the throttle cables and housing again using some penetrating lubricant.\u003c\/li\u003e\n\u003cli\u003eTighten the throttle housing in the correct position on the handlebars.\u003c\/li\u003e\n\u003cli\u003eAdjust the cable to the required (free play amount) of your liking.\u003c\/li\u003e\n\u003cli\u003eRotate the handlebars to their maximum position to check proper operation of the throttle and correct cable routing, some re-adjustment of the cable may be required.\u003c\/li\u003e\n\u003cli\u003eSlide the rubber boot back over the housing.\u003c\/li\u003e\n\u003cli\u003eCover the hole in the end of the grip with some electrical tape (To stop glue entering the throttle barrel) and apply a small amount of RFX grip glue to the outer end of the throttle tube on the outside diameter.\u003c\/li\u003e\n\u003cli\u003eApply a small amount of RFX grip glue to the inside of the new grip and slide onto the tube.\u003c\/li\u003e\n\u003cli\u003eTwist the grip to the correct position and leave to dry.\u003c\/li\u003e\n\u003cli\u003eApply RFX safety grip wire if needed.\u003c\/li\u003e\n\u003cli\u003eAfter the glue has dried again check proper operation of the throttle. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RFX","offers":[{"title":"Default Title","offer_id":52789815443720,"sku":"FXTT5010199BK","price":54.99,"currency_code":"EUR","in_stock":true}],"url":"https:\/\/www.rfxracing.com\/products\/throttle-tube-fxtt5010199","provider":"RFX racing","version":"1.0","type":"link"}